Run every OLT and every ONT from one fast panel.
PonPilot authorizes, configures and watches your Huawei OLTs and all your ONTs, Huawei, ZTE and third-party, from the cloud. Changes take seconds, customers stay online, and your NOC sees a fibre cut before the phone rings.
- MA5608T · MA5680T · MA5800
- Any GPON ONT brand
- Flat price per OLT
| Name | PON | Signal | Profile |
|---|---|---|---|
| Main.Bazar.Ali | 0/1/3:12 | -19.8 | Synced |
| Ward4.Hamza | 0/1/3:13 | -21.4 | Synced |
| Canal.Road.Usman | 0/1/5:2 | – | Synced |
| Office.Block.B | 0/2/0:7 | -18.2 | VLAN |
| Station.Rd.Bilal | 0/2/4:31 | LOS | Synced |
| Model.Town.Sana | 0/2/4:32 | -22.0 | Synced |
See PonPilot in under a minute
Already running 5,000+ ONTs on 7 Huawei OLTs
PonPilot started as the in-house system of a fibre ISP in Pakistan. Every feature was built for a real NOC problem and proven on live customers before it reached this page.
0.4 s to authorize
New ONTs are added over SNMP instead of slow CLI sessions, then read back to confirm. A CLI fallback with automatic rollback covers the rest.
No customer downtime
Move thousands of ONTs to new line and service profiles in place. In one night 1,224 ONTs moved on one OLT and not a single PPPoE session dropped.
Faster than the phone
When five ONTs on one PON go dark together, the fibre-cut alarm names the two customers the cut lies between, before anyone calls.
One panel instead of telnet, U2000 and a separate ACS
Every daily job on a GPON network, in plain screens your team learns in an afternoon.
Authorize & provision
Autofind list, presets, router or bridge mode, VLANs, speed, management IP and TR-069 in one dialog.
Built-in TR-069 ACS
Wi-Fi name and password, PPPoE, DNS, web login, connected hosts, ping and traceroute from the ONT. No separate ACS to buy or run.
Live signal & graphs
Rx/Tx power, distance and traffic per ONT, PON and uplink. LIVE mode refreshes every 3 seconds.
Fibre-cut locator
Separates real cuts from power cuts and load-shedding, shows the cut point on the PON and lists the customers affected.
Bulk operations
Filter by OLT, board, PON, model, profile or status and change hundreds of ONTs at once, with progress, results and automatic checks.
LAN ports & MAC limit
Switch ONT LAN ports on or off and limit MAC addresses per ONT from the OLT, one ONT or a whole area, with policies for new ONTs.
OLT backups & diff
Nightly configuration backup of every OLT, stored only when it changes, with a side-by-side diff of what changed.
Roles & audit
Staff see only the OLTs and actions their role allows. Every change is logged with who, when and what.
Web terminal
A real OLT command line in the browser for the rare job that needs it, with read-only mode for junior staff.
Your ONTs, whoever made them
Each model is tested on a live network and gets the right GEM mapping, so routers and bridges pass traffic after every change.
No public IP on your OLT. One command on your MikroTik.
PonPilot reaches your OLTs through an encrypted tunnel your own router builds.
Sign up
You get yourisp.ponpilot.com and a free trial.
Paste one command
Copy the one-time command into your MikroTik terminal. The tunnel comes up in seconds.
Add your OLT
Enter its private IP and login. PonPilot reads every board, PON and ONT.
Work
Authorize, configure and monitor. Your ONTs report to the built-in ACS through the same tunnel.
Questions
Which OLTs does PonPilot support?
Huawei GPON OLTs: MA5608T, MA5680T/MA5683T and MA5800 series. V800R018 and V100R018 software are in production use.
Does it work with third-party ONTs?
Yes. Standard GPON ONTs of any brand are authorized with OMCI and generic profiles. PonPilot also keeps the OLT's third-party switch on, so an old management system can't lock them out again.
Will my customers drop when I move to PonPilot?
No. PonPilot can manage your OLT exactly as it is configured today. When you choose to move ONTs onto clean profiles, the change happens in place and is checked ONT by ONT, with automatic roll-back if one doesn't come back.
Do I need a public IP or port forwarding?
No. Your MikroTik builds a WireGuard or OpenVPN tunnel to PonPilot. OLTs and ONT management stay on private addresses.
How is it priced?
A flat price per OLT, with unlimited ONTs, users and features. See pricing.
Try PonPilot on your own OLT
Free trial, we help you set it up, no card needed.